Particl Wiki / Tutorials & Howtos / Staking / Staking on DSD with Partyman Edit this page

Staking on DSD with Partyman

DSD are ideal way for running Particl full node and getting staking rewards for securing the network 24/7

A Staking Node is a full blockchain node which has been configured to stake on behalf of your wallet (aka it has been delegated staking power over your wallet). The Staking Node is a computer running Particl that is always on and always connected to the internet. A Raspberry Pi 3 or comparable device (DSD) makes a perfect staking node as it consumes very little energy, is compact and easy to tailor for dedicated tasks.

Before you’ll dive into this guide, familiarize yourself with Dedicated Staking Devices and Partyman utility.

Requirements

Even though you could set up particld for staking on your DSD manually, we’ll focus on using Partyman staking utility, thanks to all the automation and ease of use it offers.

  • Particl wallet – your primary wallet with funds on it (Particl Desktop, Particl Core or Particl Copay)
  • hardware for staking – Raspberry Pi +3, Rock64 or other (“DSD”)
    • older versions of RPi should work as well, but keep in mind that CPU performance does matter when staking, so you might not get ideal results
    • at least 32 GB of storage (SD card)
    • internet access (wifi or cable) set up and working (follow guides for your device)
    • SSH access to device or connected monitor
    • Debian/Ubuntu-based OS (you can use any other distro, but you’ll have to change following commands accordingly)

Installation

Visit Partyman’s Github repo for more information if needed.
  1. SSH to your device (or connect your monitor)
  2. Make sure your system is up-to-date:
sudo apt update && sudo apt upgrade

Install Partyman

Download Partyman and install its dependencies:

sudo apt-get install python git unzip pv jq dnsutils
cd ~ && git clone https://github.com/dasource/partyman

Install Partyman:

cd partyman/
./partyman install

This will download, unzip and install the latest release Particl Core daemon (particld).

Start particld daemon:

./partyman restart now

Check particld status and verify everything is running correctly (you might need to wait a minute or two, before particld finishes starting up):

./partyman status

You should see a summary similar to this:

Output of './partyman status' command
Output of './partyman status' command

Great! Your node is now managed by Partyman and you have the latest particld daemon running!

Create a staking wallet

Generate a new wallet on the device by running:

./partyman stakingnode init

Follow instructions on screen to complete wallet setup.

Make sure you safely note node’s Recovery Phrase in a safe place!
This is the only key to your wallet in the unfortunate event that your device would got broken/stolen etc. Lose the key = lose the wallet!

Generate staking public key

Next, we’ll create the public key which we will use within the Particl Desktop/Core to activate Cold Staking. We’ll use Partyman utility for this as well.

To generate a new staking public key:

./partyman stakingnode new

Follow the directions to complete staking node public key creation. Public key label is just for you, so you know which key is connected to which wallet (in case you want to use multiple ones, e.g. staking on your desktop Particl Desktop and your mobile Particl Copay).

You should see a Particl public key similar to this:

PPARTKVAobLsHTQpZ5LzFHcZw8LD4sEEVuUdmcuAqCjDaaNJgypRmUUpFKMxbmn1hZ5V2J9SaG1QusCrngC9iiBAA8LvxVRx9aLBPjGeY4PtrxzW

And there’s your staking public key! Make note of it somewhere, you’ll need it later (friendly reminder that CTRL+C in Terminal doesn’t copy text, so use your mouse’s right-click instead).

Summary

So far, we’ve achieved to:

  • setup Partyman utility for managing your node via Partyman
  • downloaded and autoconfigured latest Particl Core daemon on your device
  • created a new Particl wallet on the device, dedicated to staking
  • generated public key for staking (so that we can connect our main wallet to this DSD)

That concludes all the “tedious work” via Terminal on your Staking Node! Let’s now move onto your main wallet and connect it with your Staking Node.

Connect your wallet

To connect your wallet, follow our unified Cold staking setup guide.

Maintenance

When your node is successfully set up, here are some tips to keep your node healthy and up-to-date.

Updating particld

You should always keep your node up-to-date with latest Particl Core releases.

To update your node:

  1. SSH to your device (or connect your monitor)
  2. Make sure your system is up-to-date: sudo apt update && sudo apt upgrade
  3. To update partyman: ~/partyman/partyman update and follow on-screen instructions
  4. Wait a couple minutes for particld to restart and check status of your node with ~/partyman/partyman status - look for particld staking currently? : YES

Updating to pre-release versions

In case you want to update your particld to pre-release version (ie. betas, not yet stable releases), you can do so by:

cd ~/partyman/
git pull
./partyman update -prer

Updating partyman

In case partyman complains about updates available, you can install them simply by going to partyman’s directory and getting the latest code from GitHub:

cd ~/partyman/
git pull

Updated