Particl Wiki / Tutorials & Howtos / Privacy / Particl as Tor Hidden Service Edit this page

Particl as Tor Hidden Service

Tor hidden service conceals your IP address and thus your privacy

It also protects your machine from geolocation and its possible ugly consequences, and automatically sets you up for both incoming and outgoing connections, helping the Particl network. It is recommended to always run the Particl through Tor.

This guide is written purely for Linux (specificaly Ubuntu-based distributions).

Download Particl wallet

If you don’t have a Particl wallet yet, download it (we highly recommend verifying wallet checksums before installing) and then install it.

Install Tor

At a command prompt just enter tor.

$ tor

If it is already running, you should get an error message that says something like β€œIs tor already running?” That’s good if you do.

If not, install Tor with these commands:

$ sudo apt-get install tor

Define HS in Tor config

$ sudo nano /etc/tor/torrc

We need to add our config to the Tor configuration file which will signal Tor to create a hidden service.

HiddenServiceDir /var/lib/tor/particl-service/
HiddenServicePort 51738

Save the file with CTRL-X, type y to overwrite and confim by Enter – the text editor will exit.

$ sudo service tor restart

Find your IP for HS

At a command prompt enter:

$ sudo cat /var/lib/tor/particl-service/hostname

It should return an .onion address, which we’ll refer to as [yourexternalip].onion

It is recommended to always run the Particl build releases through Tor.

Modify particl.conf

In the .particl directory there will be a particl.conf file. The wallet can run without that but you can include a lot of startup and operating instructions with it.

$ nano ~/.particl/particl.conf

If nano returns the following error:

Error writing ~/.particl/particl.conf: No such file or directory

Then you’ll have the make the directory yourself (because the Particl wallet hasn’t ever ran on the system yet)!

$ mkdir ~/.particl
$ nano ~/.particl/particl.conf

Your particl.conf file will need to contain at least the following. Replace [yourexternalip].onion with the onion domain you got from step 3!


Start wallet

Now you’re ready to go, start it up. You should start making connections. If you use the getpeerinfo command you’ll see the addresses of the peers and they should all be .onion addresses. Some of the peers will show your external IP .onion address and that’s normal, those are incoming connections.